Powermatic is one of the popular brands for table saws. They have created many saw models to serve customers’ requirements. Some models often need clarification on buyers because of their similarities. The matchup between Powermatic PM1000 vs PM2000 is a typical example.
Indeed, these two are identical in many features. We have to admit that they do not differ that much, but their excellent functions listed below are worth your reading.
Thus, let’s keep scrolling down to get hold of their differences!
Table could not be displayed.Contents
Powermatic PM1000 vs PM2000 Differences Between
Accuracy
Accuracy is never in doubt with these two machines. They come with an easy-to-read scale to reduce guesswork. Every knob and lever is super strong, supporting stability and greater accuracy.
Design And Material
The two saws are quite heavy and bulky since they contain a significant amount of metal.
Although both saws fall under the category of large-sized machines, there is still a significant size and weight difference between them. Powermatic PM1000 is 450 pounds and has a smaller footprint (36 x 27.5 x 63.8 inches) than PM2000, with a weight of 600 pounds and a larger footprint of 85 x 37 x 39 inches.
Both models are good options for consumers requiring a lightweight, portable saw. Yet, the weight difference (between 450 and 600 pounds) is not very noticeable compared to comparable table saws.
Additionally, their major function is to limit long-distance moving and assist with on-site cutting, so don’t blame their huge dimensions! Obviously, larger saws have the greater cutting capability.
But if you wish to own a more compact table saw, check out my Bosch 4100-10 vs 4100XC-10 rundown for more options.
To sum up, they deserve winners in design.
Motor & Drive Configuration
The motor is considered the saw’s heart, determining how fast a saw works.
Powermatic PM2000 triumphs in this regard. The blade rotates at a rate of 4300 rpm thanks to a 3-horsepower, 15 Amp, 1 ph, and 230V motor.
On the other hand, the Powermatic PM1000 has a less potent motor that uses 115V and 1.75 horsepower.
Blade
The two operate a huge 10-inch carbide blade, enabling you to deal with more depth of cuts. Cutting through 3-inch thick wood is just a piece of cake with them.
Again, this round is a one-all draw.
Rip Fence & Capacity
The fence is equipped with a rail system for ease of adjustment. The screws inside the rail are super sturdy, ensuring the fence stays parallel after switching positions.
Due to its larger size, the Powermatic PM2000’s 50-inch fence is longer than the PM1000’s 30-inch fence system. This exceptional feature provides precise cutlines and allows users additional workspace when using the saw.
Thus, the PM2000 will be the winner this round.
Miter Gauge
The included miter gauge on both saws is practical. You can make adjustments to the smallest fractions for more accurate cuts.
There comes a highly visible scale, making it easy to control and select the desired angle to a tee.
Additional Feature
The two saws set themselves apart from others thanks to their exclusive dust collector system. The dust port is 4 inches in width, maximizing productivity in collecting sawdust.
They are equal in this feature.
Safety
Powermatic PM2000 vs PM1000 models come with a blade guard to prevent the blade from rusting and protect you from injuries. Also, the pushing stick prevents close distance between hands and blade. So, you can rest assured when using these 2 table saws.
Moreover, the point making the PM2000 outstanding in safety features is its magnetic key. If you remove this key, the saw will be disabled, avoiding accidental starts and stops.
Included Components
They include many components, namely a blade, a miter gauge, a riving knife, etc. All are basic components to run or adjust the saws.
However, there is no included blade, which is really an annoyance. You have to spend time and money to buy it separately. Therefore, I won’t give any points to both.
Quick Rundown Of Powermatic PM1000
Pros
- Reasonable price
- Robust motor and high speed
- Large ripping capacity
- Large blade for more depth of cuts
- Accurate
- More reasonable price
Cons
- Quite heavy and bulky
- Not including blade
>> Read Customer Reviews: Here <<
Quick Rundown Of Powermatic PM2000
Pros
- Very safe to use
- Large ripping capacity
- Large blade for more depth of cuts
- Accurate
Cons
- Quite heavy and bulky
- Not including blade
- Higher price
>> Read Customer Reviews: Here <<
Conclusion
The comparison between Powermatic PM1000 vs PM2000 ends up a tied battle. You will be able to do numerous kinds of woodworks with their impressive ripping capacity.
As for my personal preference, I will choose the PM1000 model because of its reasonable price. Still, PM2000 offers greater safety, allowing you to work with confidence.
The Related Article
Comparison Articles