Delta 36-5100T2 vs 36-725T2 match-up features two newly launched table saws that are very similar to each other.
If you are looking for a table saw with an exceptional level of precision while still capable of great working capacity, Delta 36-5100T2 is a must-check option.
However, if your demand emphasizes strongly on productivity and cutting power, the 36-725T2 model proves to be an ideal candidate.
It is easy to point out that both table saws share similar structures and design, motor power, rip capacity, and blade diameter. However, there are slight differences in their cutting capacity, cord length, dimensions, and net weight.
Before diving into the in-depth analysis, let’s go over some of their basic features with the following table:




Contents
Comparison Between Delta 36-5100T2 vs 36-725T2
The comparison between Delta 36-725T2 vs 36-5100T2 will be conducted based on nine following criteria:
Precision
Both table saws feature a heavy-duty rail system with the Legendary Biesemeyer fence, offering pinpoint accuracy for your every cut. This special fence style allows carpenters to chop through small stock pieces precisely.
However, 36-5100T2’s precision is great out-of-the-box, while you will need some fine-tuning actions for the optimal accuracy level from 36-725T2.
In short, 36-5100T2 scores its first win in this category.
Design And Material
Coming from the same Delta brand, both apparatuses share a common design and material. Indeed, you may find their appearances very similar.
They both have a sizable cast iron table top with a unique tubular stand featuring two fixed wheels and one swivel wheel for optimized portability.
However, 36-725T2 utilizes less footprint and is more lightweight in structure, which makes it a more ideal table saw option for carpenters. Therefore, in this category, it scores a tight win.
Motor And Drive Configuration
The 15-amp motor is featured in both models, which provides them with huge cutting power.
Nevertheless, the 36-725T model can generate a higher blade speed of 3,600 RPM, while its counterpart is capable of only 3,450 RPM. Hence, the winner in this part is 36-725T.
Cutting Blade
You will find the standard 10-inch cutting carbide-tipped blade in both packages. The two blades are integrated with arbor locks to support quicker blade changes.
All in all, the two table saws draw in this aspect.
Rip Fence And Capacity
The two table saws can pull off large ripping and cutting capacity. Specifically, their rip capacities reach 30 inches on the right and 15 inches on the left side, allowing for more versatility.
Both options also provide the T-Square 3-point locking rip fence for better accuracy.
However, 36-725T gains the upper hand with their slightly better cutting capacity. The model can cut 3.5 inches at 90 degrees and 2.5 inches at 45 degrees. In comparison, the figure of 36-5100T2 is 3.125 inches at 90 degrees and 2.25 inches at 45 degrees.
Therefore, Delta-725T wins in this aspect.
Miter Gauge
Both miter gauges found in the two table saws are of top-notch quality, as they feature all the most common angles and a lock-in pin to ensure that you get the correct angle for every cut.
In short, there is another draw in the section.
Additional Features
One additional feature in both table saws that I find worth mentioning is the dust collection system that allows for all wet and dry vacuum hookups to its 2.5-inch dust port. With such a feature, sawdust mess shall be kept at the minimum level.
Moreover, the locking bevel and height adjustment wheels are found in both options as well, providing extra consistency during long and repetitive cutting sessions.
Thus, both machines share a draw in this category.
Safety Level
The legs of both options are secured by a single bolt and lock nut, which provides sturdiness and safety for operations. Thus, another draw for the two candidates.
Supporting Accessories
Besides the blade and the table saw themselves, you will receive many additional accessories, some of which include the extension tables and spreaders bar for better rip capacity.
The item sets are similar and thus generate another draw for both machines.
Quick Rundown Of Delta 36-5100T2
Pros
- Easy to assemble with clear instructions
- Quick blade changes
- Extremely accurate
- Unique tubular stand for better portability
Con
- Quite heavy a structure
>> Read Customer Reviews: Here <<
Quick Rundown Of Delta 36-725T2
Pros
- Simple for assembling and operation
- Reliable and precise cuts
- Acceptable dust collection system
- Affordable price
Con
- Not useful assembly instructions
>> Read Customer Reviews: Here <<
Conclusion
The winner in this Delta 36-5100T2 vs 36-725T2 match-up is the latter apparatus.
36-5100T2 is characterized by its pinpoint accuracy, which is ideal for carpenters of all demands, especially the veteran ones.
However, 36-725T2 is reputable for its high cutting capacity and lightweight structure. There is literally no hassle in moving this item around the workplace.