Hitachi C10FCG vs C10FCE2 are my forthcoming subjects. Hitachi is a Japanese multinational conglomerate company and has become one of the leading manufacturers focusing on new technologies.
Many of their products have been used widely. Each device brings fulfilled experience to customers, and Hitachi C10FCE2 vs C10FCG are not exceptions.
The question is: Which one out of these two miter saws will serve you better? If money is your concern, C10FCG will be the better choice. This saw will accompany you well if you care more about the design.
Otherwise, the elastomer grip of C10FCE2 with vibration-reducing brings comfortable experiences during usage, even on long, consecutive working sessions.
Moreover, this tool occupies an extended flip fence for cutting crown molding vertically. It is a great choice if you often work with large materials.
Let’s have a look at their general specifications:
The differences between Hitachi C10FCE2 vs C10FCG
The thumb activating positive stops (at 0, 15, 22.5, 31.6, and 45 degrees) supports more precise and easier adjustment of cutting angles in both tools. Thanks to this feature, new carpenters will benefit from an effortless start at work with either C10FCG or C10FCE2.
On the other side, the laser guide or LED light does not come with any of these two saws, which would be much better if installed.
Anyhow, their accuracy guarantees an excellent job; thus, I would give these two miter saws the same point in the first round.
The appearances of Hitachi C10FCG vs C10FCE2 don’t show many differences.
Hitachi C10FCG’s weight is 24.2 pounds, about 2 pounds less than its counterpart. The dimension of the C10FCE2 miter saw is 20.7 x 16.5 x 13.7 inches, whereas the 21.46 x 18.13 x 22.9-inch dimensions belong to the remaining tool.
These two products facilitate high maneuverability and easier transport among job sites.
You can easily isolate them by looking at their blade cover. The older version has the model name printed on it, while the newer one simplifies the design with only the brand name.
The design of C10FCG looks more elegant and delightful for me because personally, less is more.
This time, I will shake hands with the single bevel compound miter saw C10FCG.
These two miter saws are built with an impressive no-load speed of 5,000 RPM delivered by a 15 AMP motor. It brings clean and accurate cuts through any wood.
Hence, this round is a draw.
Possessing a sharp 10-inch 24T TCT (Tungsten Carbide Tips) saw blade, each tool earns a fair point in this battle.
The Hitachi C10FCE2 has a wide expanded flip fence that rises to 4 inches for cutting vertical crown molding.
Furthermore, it is easy to have a sturdy elastomer grip of the horizontal handle that reduces vibration; thus, you are in control at all times.
None of these features comes with Hitachi C10FCG. Therefore, there is no doubt that the C10FCE2 miter saw wins the championship this time.
The basic components that come with C10FCG are saw blade, dust bag, vise assembly, hex, bar wrench (5mm), and holder.
On the other hand, the C10FCE2 includes more accessories: saw blade, dust bag, pivoting flip fence, box wrench (10mm), vise assembly material, and support extension.
Thus, the C10FCE2 team achieves another goal by owning a greater list of accessories.
Quick Rundown Hitachi C10FCG
- Compact design
- Powerful motor and blade speed
- Lightweight and adequate size for easy maneuver
- Affordable price
- No laser guide or LED line
- No vibration-reducing
Quick Rundown Hitachi C10FCE2
- Less vibration with elastomer grip
- Satisfied handle
- Easy to carry
- Contains an extended flip fence
- More components included
- No laser guide or LED line
- More expensive
Hitachi C10FCG vs C10FCE2 debate has now come to an end.
Although these two products are both great assistants at job sites, the Hitachi C10FCE2 single bevel compound miter saw boasts more advantages, such as containing extra components and decreasing vibration for superior support in your work.
However, Hitachi C10FCG can be your potential partner if you seek a lower-priced tool.
The Related Articles
- Hitachi C10FCG vs C10FCH2
- DeWalt DW713 vs Hitachi C10FCG
- Hitachi C10FCE2 vs Makita LS1040
- Makita LS1221 vs LS1040