Hitachi C12FDH vs C12RSH2 is a highly anticipated match-up in the 12-inch blade category.
If you prefer a miter saw with massive cutting capacity and can handle various project types, you should check out Hitachi C12RSH2.
However, if you plan to do DIY applications and love to have a more lightweight structure, look no further, as Hitachi C12FDH is already an ideal choice.
Let’s take a look at the below table that outlines all the basic information about both products. This step is essential before you go face-to-face with the detailed data.
Table could not be displayed.Contents
Comparison Between Hitachi C12FDH vs C12RSH2
The following section will dissect both miter saws based on six different categories.
Precision
Carpenters will love the laser marker system that comes with both Hitachi models. This system provides a crystal clear visual of the line-of-cut and is very adjustment-friendly. You can configure it more to the left or the right side of the cut mark, depending on your preference.
The high accuracy is also reflected in the micro bevel adjustment knob, which is great for fine-tuning bevel angles.
Therefore, both machines have a draw in this opening category.
Design and Material
These two Hitachi models are quite distinct in terms of their designs. If you pay close attention, you will notice that C12FDH is simply a dual bevel compound miter saw with no sliding feature. On the other hand, Hitachi adds this convenient sliding option to the C12RSH2 model.
With the dual bevel feature, you will experience easier operations, especially with crown molding projects. Moreover, there is no risk of board-orientation mistakes.
However, with the exclusive sliding option, Hitachi C12RSH2 becomes more compact and can even operate normally when being placed against a wall. In other words, the C12RSH2 utilizes less footprint in your workspace.
Other design features such as the vertical handle with soft Elastomer grip, the thumb-actuated positive miter stops, etc., are also available in both miter saws.
All in all, the sliding C12RSH2 miter saw gains the upper hand in this section.
Cutting Power
Apart from the common 15-amp motor power, Hitachi C12FDH offers a better working angle than its counterpart. It can miter cut from 0 – 52 degrees in both directions and perform bevel cuts at up to 48 degrees left and right.
The C12RSH2 might have a better right-side miter capacity (57 degrees). However, its left-side miter angle and bevel capacity in both directions are only at 45 degrees. This limited range makes it quite difficult to handle special cases, especially those with unsquared corners.
But, to compensate for the angle range, the C12RSH2 possesses a massive crosscut capacity. At 90 degrees, the miter saw can easily chop a 4-1/8 x 12-1/4-inch wood piece, compared to the 2-3/4 x 8-inch size of its C12FDH counterpart.
Hitachi C12RSH2 is also superior with its 45-degree cutting capacity, with the data running up to 4-1/8 x 8-5/8 inches, much higher than its counterpart’s 2-3/4 x 5-1/2 inches.
In short, the winner in this vital category is the C12RSH2 model.
Cutting Blade
Both miter saws come with a 12-inches cutting blade that supports much greater capacities compared to the 10-inch category.
However, while C12FDH’s blade only contains 32 teeth, the C12RSH2 model utilizes a 60-tooth cutting apparatus.
In short, Hitachi C12RSH2 scores a win here.
Additional Features
In terms of extra options, Hitachi C12FDH really outplays its opponent.
They do have one thing in common. It is the tall, pivoting fence to support crown molding projects.
However, besides that, the C12FDH model offers a large base to generate extra balance and prevent the workpiece from warping.
It also provides externally accessible carbon brushes to prolong the miter saw life.
Thus, the C12FDH deserves a victory here.
Supporting Accessories
You will receive very similar packages upon buying the two miter saws.
Apart from the 12-inch cutting blade and the saw, the manufacturer provides you with an additional dust bag, a vise assembly, and some wrenches.
Quick Rundown Of Hitachi C12FDH
Pros
- Versatile miter saw
- Great price
- Lightweight structure
- Offering dead-on precision
Con
- Improvable dust collecting system
>> Read Customer Reviews: Here <<
Quick Rundown Of Hitachi C12RSH2
Pros
- Offering very accurate cuts
- Cost-effective price
- Having immense cutting power
- Compact design
Cons
- Heavy saw, impractical for moving around
- Unreliable dust collecting system
>> Read Customer Reviews: Here <<
Conclusion
So, the final champion between Hitachi C12RSH2 vs C12FDH is the former option.
Offered at a very affordable price, the miter saw is able to produce unmatched crosscut capacity. Moreover, all its power is packed in a very neat design.
Nevertheless, if you love to operate a miter saw that is suitable for DIY projects and prioritizes the user’s convenience, you will be in good hands with Hitachi C12FDH.
The Related Articles
Single Reviews
Comparison Articles
- Hitachi C12FDH vs Dewalt DW716
- Dewalt Dw715 vs Hitachi C12FDH
- Hitachi C12RSH2 vs Dewalt DWS780
- Hitachi C12RSH vs C12RSH2