DeWalt DWE7491RS vs DWE7480 models are two principal players in the table saw market. However, you still wonder which one will best suit your job. I am here to help you.
If you are looking for a light machine for your lumber mill, DWE7480 is a wise choice. This version can also be a great bargain, providing you with enough functions for basic woodworks.
If you are thinking about a saw with a massive ripping capacity, DWE7491RS is a good deal. For those who care more about accuracy, this model will not fail you.
Contents
Differences Between DeWalt DWE7491RS vs DWE7480
Accuracy
The two models go with highly visible bevel and miter scales, supporting you to set the desired angle correctly. Moreover, all the locking levers and knobs are super strong, maintaining stability and improving precision while working.
The DWE7491RS‘s bevel scale is super easy-to-read and is installed below the adjusting wheel, making it easier to see and control. Thanks to this high quality, it comes out on top in terms of accuracy.
Design And Material
The two saws are sturdy and well-built since DeWalt uses aluminum and high-quality plastic to make them.
DWE7491RS is quite bulky, while its counterpart weighs only 48 pounds. According to livestrong.com, an average man can lift between 135 to 175 pounds, so carrying this tool is just a piece of cake.
Thanks to its lightweight design, DWE7480 is the winner in this round.
Motor & Drive Configuration
DeWalt DWE7480 vs DWE7491RS are neck and neck in motor feature. They are equipped with a huge 15 amp motor, providing a lot of power in every cut. You can easily make a clean cut and leave a fine finish.
Blade
The two saws share the same blade design, spinning a huge 10-inch blade. Its large diameter enables you to cut through thick boards in one chop smoothly. You will save a lot of time since you don’t have to flip the workpiece over.
Rip Fence & Capacity
The rip fence on both saws is easy to slide back and forth, or you can always remove it whenever needed. It is on a rack and pinion system and is always square, so you don’t have to check the square every time you cut.
The point making DWE7491RS outstanding compared to the other option is its massive ripping capacity. This model can handle 32.5-inch material without an issue.
Miter Gauge
The included miter gauge comes with an easy-to-read scale, improving accuracy. However, this part is not really practical because it can’t be locked tightly to the rail, making it hard to select the right angle. I won’t give any points for both.
Additional Features
The two models come with a dust collector. However, DWE7480’s doesn’t work that much. Meanwhile, DWE7491RS has two dust ports, one on the blade guard and one below the tabletop. This quality is an improvement in collecting sawdust.
Safety
Both of them provide you with an equally reliable level of safety. There is a wheel to lower the blade down below the tabletop to minimize injuries.
Besides, DeWalt installs a lock over the power switch to prevent any type of accidental activation.
Included Components
They include many components, namely a blade, a miter gauge, a riving knife, etc. All are basic components to run or adjust the saws. There is no additional function, so the two saws draw nil-nil.
Quick Rundown Of DWE7491RS
Pros
- Large ripping capacity
- Large blade for wider workpieces
- Highly accurate
- Powerful
- Safe to use
Cons
- Quite heavy and bulky
- The miter gauge is not very stable
>> Read Customer Reviews: Here <<
Quick Rundown Of DWE7480
Pros
- Lightweight and easy to carry
- Large blade for wider workpieces
- Powerful
- Safe to use
- Accurate
Cons
- Inefficient dust collector
- The miter gauge is not very stable
>> Read Customer Reviews: Here <<
Conclusion
The battle of DeWalt DWE7491RS vs DWE7480 finally finds out the winner. It is three-one to DWE7491RS. If you need a powerful with a large ripping capacity, it is definitely for you.
The runner-up, DWE7480, is well-suited for mobile contractors due to its lightweight design.
The Related Article
Comparison Articles
- Bosch 4100XC-10 vs DeWalt DWE7491RS
- Bosch 4100-09 vs DeWalt DWE7491RS
- Delta 36-6023 vs DeWalt DWE7491RS
- DeWalt DWE7491RS Vs Bosch 4100-10