DeWalt DWE7480 vs DW745 comparison review will thoroughly analyze the differences and similarities, pros and cons of the two table saws. With this review, you can choose which saw is the right one for you.
If you prefer easy portability and lightweight design, the DeWalt DW745 will satisfy your concern.
The DeWalt DWE7480 has a powerful motor that gives greater precision, which will suit you well if you favor accuracy.
If you usually work on hard material, the DeWalt DWE7480 will be your answer as it has a higher rip capacity.
Do you have a tight budget and seek an affordable saw? If the answer is yes, the DeWalt DW745 will be your ultimate choice.
The table below consists of some important features of the two table saws:
Table could not be displayed.Contents
Differences Between DeWalt DWE7480 vs DW745
Accuracy
The DeWalt DW745 comes with a 15 AMP motor that can produce no-load speed up to 3,850 RPM. With this speed, you can perform major standard cuts.
Meanwhile, the DWE7480 is equipped with a 15 AMP but can generate a speed of 4,800 RPM, allowing you to finish with more precision and accuracy.
For this reason, I would prefer the DeWalt DWE7480 in this category.
Design
Both items have a lightweight design that is suitable for transportation between job sites. Moreover, they are comparatively durable to heavy-duty works at construction sites.
However, the DeWalt DWE7480 is slightly heavier than the other as it comes with more supporting accessories and restrictions.
After much consideration, I have chosen the DeWalt DW745 for its portability and on-site ready features.
Motor and Drive Configuration
The two machines use direct-drive configurations, permitting the blade to transfer all the power produced to the cutting blade. Even though this type of drive requires less maintenance and is light, it sometimes creates vibration and noise.
But do not worry because these models are high quality enough for both professionals and hobbyists.
In this round of competition, the two items end in an equal draw.
Blade
In this blade battle of DeWalt DW745 vs DWE7480, the DW7480 has a 10-inch 24-tooth carbide blade for strong and steady cuts. It can also use additional cuts in support. This advantage seems to win favor from its opponent as the other model can only use one blade.
The DeWalt DW7480 is undoubtedly the winner of this turn.
Rip Fence and Capacity
The fences for both items have the same quality and design. They prove their worth with signature locking and sliding mechanism for ease and accuracy of use.
As for the rip capacity, the DeWalt DW745 has the maximum rip of 20 inches to the right of the blade. Simply put, you can’t cut a full sheet material into half at one cut. You will want to use a machine like the DeWalt DWE7480 with a rip capacity of 24 inches, providing you greater potential.
When selecting the winner, the DWE7480 meets all my needs.
Miter Gauge
Both machines have built-in miter gauge accessories, permitting you to hold the materials in place, set the perfect angles, and easily attach the materials on the table.
Therefore, the two items are on par with each other.
Supporting Features
When coming to construction sites and narrow workshops, dust waste is inevitable and harmful to your health. Therefore, you will need an efficient dust collection system. Fortunately, both items have dust collectors featuring a 2 ½-inch vacuum duct for easy and effective cleanup.
In this aspect, you can choose either of the two machines as they both have satisfying supporting features.
Safety
These branches of the DeWalt table saw optimize customers’ safety. The two machines mostly come with a push stick, blade guard, and anti-kickback mechanism to maintain safety during operation.
Additionally, these safety accessories can be kept inside the tools themselves, proving optimal convenience.
In terms of safety, both items are adequate and qualified for your needs.
Included Accessories
When making a purchase, the DeWalt DW745 comes with a table saw, a blade, a miter gauge, a push stick, and a blade guard, while the DWE7480 package will not include a blade. This requires you to make another purchase for the blade.
In this round, I choose the DW745 for its availability.
Quick Rundown of DeWalt DWE7480
Pros
- Powerful motor and high no-load speed
- Solid fence and large rip capacity
- Applicable additional blades
Cons
- Rather limited cutting capacity
- Relatively expensive compared to the other
>> Read Customer Reviews: Here <<
Quick Rundown of DeWalt DW745
Pros
- Lightweight design for easy portability
- Durable for heavy-duty jobs in construction sites
- Budget-friendly
Cons
- Limited rip capacity
- Unable to use additional blade for more refined cuts
>> Read Customer Reviews: Here <<
Conclusion
In this DeWalt DWE7480 vs DW745 comparison review, I deem the DWE7480 as the final winner!
All in all, the DeWalt DWE7480 displays strong competence with remarkable power and precision. Even though this machine is slightly costly, its high quality won’t let you down as a professional or a hobbyist.
However, if you prefer an easily portable and budget-friendly machine, you can go for the DeWalt DW745 as it is convenient at a reasonable price.
The Related Article
Comparison Articles
- DeWalt DWE7480 Vs Bosch GTS1031
- DeWalt DWE7480 vs Ridgid R45171
- DeWalt DWE7485 vs DWE7480
- DeWalt DWE7491RS vs DWE7480
- DeWalt DW745 vs Bosch GTS1031