Today, I’ll walk you through the battle of Dewalt DWE575SB vs Makita 5007MG so that you can pick the right circular saw for your woodwork.
Are you a stickler for precision? Makita 5007MG can serve you the best. Even better, this model comes with a speedy blade for quick cuts and fine finishes.
If your job requires constant travel, Dewalt DWE575SB will ease your burden with its compact and lightweight design. And Dewalt also offers a great deal with this circular saw for those on a budget.
For those looking for a robust tool, both of them can satisfy you with powerful 15-amp motors.
Before getting closer to these two, let’s take a quick look at their specifications.
Table could not be displayed.Contents
Differences Between Dewalt DWE575SB vs Makita 5007MG
This part will be my detailed comparison of some important features of the two models.
Accuracy
There is an easy-to-read scale on the base so that you can select the desired angles to a tee. Also, both are equipped with an electric brake for timely stops, allowing you to make precise cuts without leaving a rough finish.
But I love the Makita 5007MG circular saw for its dead-in accuracy that its competitor can’t beat.
The double built-in LED light works as a guide, providing an accurate cutting path. By forming a shadow on the surface, all you have to do is pull the blade down exactly on the defined line.
I can’t find any reason not to give Makita a big thumbs up.
Design And Material
I can’t wait to tell you what makes Dewalt DWE575SB the winner in this round. It contains an aluminum base while Makita 5007MG, as its name suggests, offers magnesium shoes. In theory, Mg is 33% lighter than Al, but Makita fails to make a lightweight and compact circular saw.
You’ll notice that the Dewalt model is much smaller, with the dimensions of 16.25 x 10.13 x 10.5 inches, and weighs only 8.8 pounds. Its design is a blessing for mobile carpenters and framers. You can rest assured with its portability.
That said, both aluminum and magnesium work well in maintaining the balance and stability when cutting.
Power And Speed
Now, the battle of Makita 5007MG vs Dewalt DWE575SB is equal with one point for two competitors. Let’s discover which circular saw will score in this round.
They run robust 15-amp motors, delivering plenty of power to cut through tough materials like butter. But what sets them apart is their blade speed.
The Makita 5007MG offers an industry-leading speed of 5,800 rpm for incredibly smooth cuts and super clean finishes. This impressive figure gives it another point in this battle.
Blade
At first glance, you may think that they share the same carbide blade. With a 7.25-inch diameter, they enable you to make 2.5-inch cuts at 90° and 1.75-inch bevel cuts at 45° with ease.
But Makita differentiates its products by an ultra-coated frame for the blade. This frame helps reduce the pitch build-up for cleaner cuts and heat while operating for greater durability.
Not to mention, the exceptional M-shaped teeth are designed for smoother and faster cuts.
Thanks to its special features, the Makita 5007MG takes the lead over the other.
Additional Feature
The build-up of sawdust is always a pet peeve for carpenters to measure the cutting line accurately. Luckily, the two models come with a built-in dust blower to clear up your cutting path for higher accuracy.
However, it would be best if they come with a safety feature for the trigger. If you are a stranger to circular saw, it’s quite dangerous and will take quite some time to get used to it.
Included Components
Both circular saws come with the same accessories in the package: a blade, a blade wrench, a rip fence, and a tool case. They are all fundamental parts for assembling and running a saw, so there is no winner here.
Quick Rundown Of Dewalt DWE575SB
Pros
- Lightweight and compact design
- Powerful motor
- Decent accuracy with electric brake
- Integrated dust blower for greater sight
Cons
- Not very high speed
- No safety feature for the trigger
>> Read Customer Reviews: Here <<
Quick Rundown Of Makita 5007MG
Pros
- Super accurate with two LED lights
- Powerful motor
- High-speed blade for clean cuts
- Ultra-coated blade for better heat resistance
- Integrated dust blower for greater sight
Con
- No safety feature for the trigger
>> Read Customer Reviews: Here <<
Conclusion
The battle between Dewalt DWE575SB vs Makita 5007MG has come to an end. The winner is the Makita 5007MG. The combination of high accuracy and supreme blade speed makes this circular saw well-suited for any woodworkers.
Still, if your job does not require a lot of moving, DWE575SB can be a potential candidate with its ergonomic design.