DeWalt DW713 vs Hitachi C10FCG are two great representatives for single bevel miter saws from the West and the East that are better at angles than table saws.
Although these 10-inch compound saws are powerful in some main points, the DeWalt DW713 still has some strong advantages in its capacity and additional features to be the overall winner.
But if you only need a miter saw for some occasions, then the extremely budget-friendly Hitachi C10FCG will satisfy you.
The table below will give you a closer look at these miter saws.
Contents
Comparison Between DeWalt DW713 vs Hitachi C10FCG
Overall, they are 2 strong competitors. These machines have their own specific strengths and weaknesses, and they also have lots to put in to make this truly a down-to-the-wire battle.
Accuracy
Both saws’ overall components are built to enhance accuracy. For example, a large table for better material support and a miter detent plate with positive stops at different degrees.
The C10FCG’s differences come from its vice clamping system for secure workpieces better. It also has a thumb-actuated positive stops system for quick miter adjustments at 9 different settings.
It supports 0° – 52° miter angle range to the right and left and 0° – 45°bevel range to the left for accurate and clean cuts.
On the other hand, DW713’s miter detent plate has 11 positive stops, two more than the other, plus a cam miter lock handle and a miter detent override mechanism to enhance accuracy even more.
But, while its bevel range is likely the same (3° – 48°), its miter capacity is slightly smaller than its opponent (0° – 50°).
This round is quite a toe-to-toe competition between Hitachi C10FCG vs DeWalt DW713. But the winner in my book is DeWalt DW713 because more positive stops mean more accuracy.
Design and Material
While they share some similarities in the overall design and material, you can see some distinct differences between them.
The C10FCG’s look is a new design from Hitachi. Its usage of green makes it stand out, giving it a unique and stylish appearance.
The dimension of this 24.2-pound machine is quite small as well (18.13 x 22.9 x 15.46 inches). This lightweight design makes its transportation and storing a walk in the park.
In the other corner, DW713 is bulkier than the other. It has a dimension of 19 x 23.8 x 17 inches and weighs 35 pounds. This design gives it a sturdier, steadier look.
Considering C10FCG is way better for portability, I will choose it as this round’s winner.
Power and Capacity
They both provide a 15 amp motor and use the same amount of voltage – 12 volts. It will deliver strong miter and bevel cuts with ease.
C10FCG’s max cutting capacity is 2-5/16 x 5-21/32 inches, or 3-1/2 x 3-31/21 inches at 90°, and 1-5/8 x 4 inches when beveled at 45°. When you miter at a 52° angle in any direction, the blade can cut up to 2-5/16 x 3-1/2 inches, delivering high versatility in basic molding projects.
DW713’s maximum capacity is slightly bigger than that. It has a horizontal capacity of 5-1/4 inches and a vertical capacity of 4-1/2 inches for crown moldings due to its bigger size.
In this round of capacity, DW713 has scored its second point. It can handle more moldings than its opponent.
Cutting Blade
Both machines share a 10-inch blade with a big horizontal handle on top to secure the users’ holds.
But DW713’s miter detent plate has more positive stops than its opponent. This feature will allow its users to bring the blade to the most common angles for cutting and molding purposes.
And that is the same reason why DW713 is the winner of this round.
Additional Features
These two machines have some interesting additional features that the other one does not have.
DW713 has a built-in carry handle for easy lifting and moving the saw.
C10FCG has a very special feature: a carbon brush access mechanism that allows users to replace the brush as needed to prolong the life of this machine. It also included a dust collector attachment.
The more impressive point is that C10FCG has a 5-year warranty, two more years than the other! But to be fair, DW713 has a 1-year free service and 90-day money-back guarantee, which is a very nice service from DeWalt.
To pick a winner for this round, I will choose C10FCG. Its carbon brush access mechanism is an interesting system for a saw to have.
Included Components
DW713’s basic components feature the 10-inch compound miter saw, a blade wrench, a carbide blade, a dust bag, and a user’s guide.
C10FCG also includes 5 things: the 10-inch miter saw, a dust bag, vise assembly for crown molding, a hexagonal bar wrench (5mm), and a holder.
Considering they are all basic components for each saw, I will conclude that this round is a tie.
Quick Rundown of DeWalt DW713
Pros:
- Cam-miter lock handle and built-in carry handle
- Miter detent plate with 11 positive stops
- Can handle more moldings
Cons:
- Relatively heavy
- No LED light
>> Read Customer Reviews: Here <<
Quick Rundown of Hitachi C10FCG
Pros:
- Easy to transport
- Budget-friendly
- Carbon brush access mechanism
- 5-year warranty
Cons:
- Limited molding capacity
- Less positive stops
- No carry handle
- No LED light
>> Read Customer Reviews: Here <<
Conclusion
With the final score of 4 – 3, I am pleased to announce the winner of this head-to-head battle of comparison between the DeWalt DW713 vs Hitachi C10FCG – the DeWalt DW713!
This machine has almost everything an expensive miter saw can offer! From the mighty motor and blade to the molding capacity, you can easily see why this saw is superior.
But if your budget is limited, and a miter saw is not what you use often, then I promise that the budget-friendly Hitachi C10FCG is the right choice for you!
The Related Articles
Single Review
Comparison Articles
- DEWALT DW713 vs DWS713
- DEWALT DW713 vs MAKITA LS1040
- DEWALT DW713 vs DW715
- Hitachi C10FCG vs C10FCE2
- Hitachi C10FCG vs C10FCH2