My DELTA 26-2240 review will give you better insight into one of the flagship products from DELTA: The 26-2240 saw.
In October 2017, the DELTA manufacturer officially released the DELTA 26-2240 miter saw. After five years of introduction, the machine still gains many positive feedbacks from the wood maker community.
What makes the 26-2240 distinctive is its smooth and precise cuts and affordable price. Besides, the 26-2240 comes out with a space-saving design.
Notwithstanding, some ongoing problems need to be resolved on this product. Let’s dive deep into these points now.
Who Should Buy This Product?
While surfing along the Internet, I can easily find out many good comments regarding the machine. Most customers see the 26-2240 cuts effectively and smoothly, and its robot arms are the most amazing feature compared to others in the market.
Precise and smooth cuts
With the 4,000 RPM motor and 10 inches, the 26-2240 seems to be a quite weak machine at first sight. However, after trying this saw, my impression changes completely.
No matter which type of wood or how thick the wood board is, this miter saw provides quick, powerful cuts even to the thickest board I chose. To add-in, the cuts are so smooth and easy to conduct, making your woodcutting time most comfortable as possible.
Therefore, if you are wondering about the cuts’ efficiency, let me tell you: no need to worry more!
What makes this miter saw distinguished from other models in the market is the robot arms. You may question: “What is the function of robot arms?”.
According to the Delta manufacturer manual, these robot arms are equipped as an articulating system to adjust the blade, the bevel, the miter as you want to.
Typically, you must control the cutting system manually, which means there will be deviations, right? With the robot arms, users can decrease the distortion and reach the best preciseness possible.
Handy front bevel control
I am highly-voted for the handy bevel control system, as it provides me the full management of the bevel. To be specific, there is a lever at the front of the blade, allowing users to monitor the bevel without reaching the dread.
In my opinion, this bevel control mechanism is simple, easy to install and use. Additionally, there is a small friction to prevent the saw from slipping, protecting your body from accidentally cutting.
There is a high chance of getting tripped to the blade and cutting my fingers severely for clumsy people like me. With this friction, I feel safer when conducting on the saw.
Which Features Need Improvement?
Based on my experience, the dust collection port cannot gather waste effectively. The dust port is so tiny and impossible to contain waste properly, or in other words, they cannot work at all.
At first, I thought it was a problem only on my saw, but, surprisingly, when reading DELTA 26-2240 reviews on the Internet, I realized that lots of customers share the same struggle.
I advise you to buy an additional dust vacuum to remove all the debris after cutting woods, as the dust collection port makes me feel so annoyed.
Another problem that the DELTA 26-2240 has in the meantime is its bulky design. The machine weighs more than 55 pounds and takes such a spacey area to place.
For female users, installing and moving this saw is quite challenging for the huge size mentioned above.
Alternative products for DELTA 26-2240
Same cost range
Significantly better performance
In case you demand a miter saw with better performance, we advise you to search: Festool Kapex and Dewalt DHS716AT2. Both machines are high-end products in the miter saw world. If you want to have the best miter saw ever, then choose these two.
The Related Articles