When it comes to miter saw, buyers often find it hard to choose the right one for them among plentiful options in the market. This post will compare the two eminent models Bosch CM10GD Vs Makita LS1019L to help you decide which one is for you.
In short, I’ve listed down below the key selling points of each model:
- If you’re seeking the best miter saw for design, the LS1019L will be a good choice.
- Should you want to find one for precision, the CM10GD suits you nicely.
- If you need a saw delivering great ease of use, you can opt for the LS1019L.
- The CM10GD should amaze you if you plan to buy a miter saw with maximum safety.
Below I have compiled a comparison table so that readers can have a clear lookout on each product’s specifications:
Differences Between Bosch CM10GD vs Makita LS1019L
Bosch has patented the axial-glide system on the CM10GD so that the machine can create cuts with correct alignment. I tried cross-cutting a piece of plywood at a 0-degree angle and got a perfect square with four sides of 5-½ inches.
The LS1019L also delivers nice exactness thanks to the Makita’s DXT trademark. This cutting innovation has added to the miter saw’s cutting limit and highlighted its precision. However, once in a while, I still realized some rail wearing when working on thick materials.
As seen, the CM10GD dominates this ground.
The Makita LS1019L has remarkably surprised me with its exceedingly compact design. Weighing at only 57.9 lbs, this sliding machine is more versatile and easier to carry to the job site than its 64-lbs rival.
Besides, with a dimension of 22.05 x 32.68 x 21.65 inches, LS1019L greatly increases the economy of the room. I could store it in hard space and make the majority of my little and confined workshop. On the other hand, I actually find it difficult to place the CM10GD in tight corners due to its large dimension of 32 x 26.5 x 20.5 inches.
In this stage, the Makita LS1019L wins.
Either the CM10GD or LS1019L generates a capacity of 12 inches. That means they’re able to create fairly large cuts on stuff – wide enough to deal with tough pieces of lumber.
The Bosch’s device gives out a wider 5-½-inch 0-degree max cutting, whereas the Makita’s one produces a broader 45-degree cut of 6-⅝ inches. The two models are both extremely efficient for immense cuts vertically and horizontally.
So, there is a draw in the third place.
While the CM10GD’s blade diameter is 10 inches, the LS1019L’s is slightly wider than ¼ inches. I actually recognized Makita’s mildly better performance when working on thick materials.
Besides, the CM10GD’s blade speed is a far cry from the LS1019L’s. When I tested the Bosch’s miter saw, I was nuts about its excellent delivery of 4000 RPM at no-load condition. This revolution assisted me dramatically in completing the tasks in a short time.
In contrast, the LS1019L’s rate of 3200 RPM may satisfy beginners, but not professional carpenters. Although I could experience a smooth speed control, this saw wasn’t as time-efficient as its competitor.
They both score one point on this ground!
The Bosch CM10GD comes with a more effective dust collection chute owing to its integral vacuum adapter. This dust port rarely leaves any debris when running. On the contrary, it’s not easy to clean-up without a built-in vacuum after using the LS1019L.
Safety may be the factor that many buyers take notice of in my Makita LS1019L Vs Bosch CM10GD review. The CM10GD has got a blade guard to protect not only the cutter from damage but also children from being injured. Without this feature, the LS1019L may lose the chance of winning.
Obviously, the CM10GD has gained ground on its opponent.
While the CM10GD is a bare-tool, its rival comes with various accessories, like rolling stands, flashlights, or gun parts. These implements allow an improved workflow and optimal performance when combined with each other.
In this term, the LS1019L takes the lead!
Quick Rundown of the CM10GD
- Great exactness
- Large capacity
- Superb no-load speed
- Effective dust collection
Quick Rundown of the LS1019L
- Large capacity
- Efficient on thick stuff
- Plentiful accessories
- Rail wearing sometimes
- Slow no-load speed
- Lacking safety features and a dust port
Bosch CM10GD Vs Makita LS1019L – who is the final winner? I decided to award the title winner to both of them. If I were to choose, I’d go for the CM10GD. As this model’s high precision, fantastic blade speed, and advanced safety features really apply to experienced woodworkers, like me.
Besides, should it be your first time with a miter saw, the Makita LS1019L will cover you with great ease of use, outstanding portability, and maximized added accessories.
The Related Articles
- Makita LS1019L vs LS1219L
- Makita LS1019L vs Dewalt DWS780
- Makita LS1018 vs LS1016
- BOSCH GCM12SD Vs CM10GD
- BOSCH GCM12SD Vs DEWALT DWS780