Bosch 4100XC-10 vs DeWalt DWE7491RS products have been two principal players in the table saw market. However, customers still confuse when they consider purchasing a tool. My in-depth comparison will help you sort out the problem.
If your work requires a large ripping capacity, DWE7491RS will serve you the best. This tool also delivers an amazing speed for quicker cuts.
On the other hand, Bosch 4100XC-10 is an ideal option for heavy-duty tasks with its robust motor. Those looking for a budget-friendly machine will also find the Bosch model an optimal choice.
Table could not be displayed.Contents
Differences Between Bosch 4100XC-10 vs DeWalt DWE7491RS
Accuracy
You can believe in the accuracy of both saws. They come with a clear and easy-to-read scale, making it easier to select the angle. Besides, the electric brake maximizes precision since it helps to make quick stops at the right time.
Design And Material
The tabletop of the two saws contains 100% stainless aluminum, improving their durability. Also, high-quality plastic is used to reduce breakage.
Although the two saws are rather heavy, Bosch 4100XC-10 offers more portability. Its foldable and rolling stand not only makes it easier to transport but also takes a small footprint in your workshop.
Motor & Drive Configuration
The Bosch model runs an amazing 4 horsepower motor while the other only goes with 2 horsepower one. Its motor delivers high torque, leading to greater horsepower at a limited rpm. Therefore, this beast can provide you a ton of power for heavy-duty tasks despite having low speed.
Moreover, this table saw is equipped with a soft-start function for less noise during operation and reducing damage to the motor.
These features make 4100XC-10 the better choice for motor design.
Blade
DeWalt DWE7491RS vs Bosch 4100XC-10 models share the same type of blade. They run a huge 10-inch blade, enabling you to cut through 3-inch boards vertically with ease.
However, DWE7491RS can spin up to 4,800 rpm, which is ideal for quick cuts and leaves a super fine finish. This feature makes it the winner in blade design.
Rip Fence & Capacity
The rip fence on both saws is easy to slide back and forth, or you can always remove it whenever needed. It is on a rack and pinion system and is always square, so you don’t have to check the square every time you cut.
The two saws enable you to rip through 30-inch boards without an issue. Therefore, they are neck and neck in terms of capacity.
Miter Gauge
The included miter gauge on both saws is practical. You can make adjustments to the smallest fractions for more accurate cuts.
There comes a highly visible scale, making it easy to control and select the desired angle to a tee.
Additional Feature
The two models come with a dust collector. However, Bosch 4100XC-10’s doesn’t work that much. Meanwhile, DWE7491RS has two dust ports, one on the blade guard and one below the tabletop. This quality is an improvement in collecting sawdust.
Safety
The riving knife plays an important role in safety features because ripping work is prone to kickback. This part will minimize dangerous accidents for carpenters.
I will give a big thumbs up for Bosch 4100XC-10 in safety. This model comes with a so-called restart protection, preventing accidental starts.
Included Components
Both of them include some components in their package, such as a carbide blade, a miter gauge, blade wrenches, etc. There is no special function, so they won’t get any point.
Quick Rundown Of Bosch 4100XC-10
Pros
- Extremely powerful motor
- Foldable and rolling stand for more portability
- Accuracy
- Very safe to use
- Large blade for more depth of cuts
- Large ripping capacity
Cons
- Inefficient dust collector
- Quite heavy
>> Read Customer Reviews: Here <<
Quick Rundown Of DeWalt DWE7491RS
Pros
- Very speedy
- Large blade for more depth of cuts
- Large ripping capacity
- Safe to use
- Accuracy
Cons
- Quite heavy and bulky
- Not very powerful
>> Read Customer Reviews: Here <<
Conclusion
The comparison battle between Bosch 4100XC-10 vs DeWalt DWE7491RS has come to an end. The winner goes to 4100XC-10. Its outstanding motor and portability make it a perfect table saw for your workshop.
For those who want a more speedy tool, DWE7491RS is worth your consideration.
The Related Articles
Comparison Articles
- Bosch 4100-09 vs DeWalt DWE7491RS
- Delta 36-6023 vs DeWalt DWE7491RS
- DeWalt DWE7491RS Vs Bosch 4100-10
- DeWalt DWE7491RS vs Skilsaw SPT99-12
- DeWalt DWE7491RS vs DWE7480