Bosch 4100-10 vs GTS1031 models are brothers from the Bosch family. However, they differ in many features. Listed below are the major points setting them apart.
If you are into accuracy, Bosch 4100-10 won’t upset you. This model also offers a massive ripping capacity for various woodworks. In the meantime, GTS1031 delivers an impressive speed for quick and clean cuts.
Besides, the two products are proper candidates for those who prefer more power due to their robust motors.
Contents
Differences Between Bosch 4100-10 vs GTS1031
Accuracy
You can believe in the accuracy of both saws. They come with a clear and easy-to-read scale, allowing adjustments to the smallest fraction. Besides, the electric brake maximizes precision since it helps to make quick stops at the right time.
Design And Material
The tabletop of the two saws contains 100% stainless aluminum, improving their durability. Also, high-quality plastic is used to reduce breakage.
The best part of Bosch 4100-10 is its foldable and rolling stand. You won’t get any difficulty transporting as well as storing it in a small workshop. This feature makes it the better choice for mobility.
Motor & Drive Configuration
Bosch GTS1031 vs 4100-10 models are equipped with a huge 15 amp motor, delivering a ton of power for slicing all types of wood. Cutting oak or walnut wood is as easy as ever with these machines.
Also, they are equipped with a soft start function for less noise and more stability of power during operation.
Blade
The two models come with a 10-inch carbide-toothed blade, enabling them to deal with wider dimensions. You can cut through 3-inch boards vertically with ease. Being made of carbide, a super hard material, their blades can slice through any type of thick wood.
However, Bosch GTS1031 can spin up to 5,000 rpm, which is ideal for quick cuts and leaves a super fine finish. This feature makes it the winner in blade design.
Rip Fence & Capacity
The rip fence on both saws is easy to slide back and forth, or you can always remove it whenever needed. Moreover, there is a ledge on the fence to maintain stability. No matter how far your material is coming, you have the place for it to sit.
Bosch 4100-10 seems to outweigh its brother, thanks to the larger ripping capacity. You can make rip cuts through 25 inches in width without an issue.
Miter Gauge
The miter gauge of Bosch GTS1031 is a disappointment. The numbers on the scale were marked in the same color as the base, struggling you somewhat when selecting angles.
Meanwhile, the other option comes with a highly visible scale, making it easy to control and select the desired angle to a tee. Therefore, I will give the 4100-10 version one more point.
Additional Feature
The equipped dust port on both saws is hit-and-miss. It does capture sawdust but not that much. After just cutting a few boards, you have to clean up everywhere. Again, there is no winner here.
Safety
The two products bring you a reliable level of safety. There comes a blade guard to prevent the blade from rust and protect you from injuries. Besides, the riving knife plays an important role in safety features since it minimizes dangerous kickbacks.
Included Components
There come many accessories in the package of the two products: a blade, a miter gauge, a riving knife, etc. All of them are fundamental components to operate a table saw, so there is no winner here.
Quick Rundown Of Bosch 4100-10
Pros
- Foldable and rolling stand for more portability
- Large ripping capacity
- Large blade for more depth of cuts
- Powerful motor
- Accuracy
- Safe to use
Con
- Inefficient dust collector
>> Read Customer Reviews: Here <<
Quick Rundown Of Bosch GTS1031
Pros
- Large blade for more depth of cuts
- Very speedy for quick and clean cuts
- Powerful motor
- Accuracy
- Safe to use
Cons
- Inefficient dust collector
- The miter gauge isn’t very visible
>> Read Customer Reviews: Here <<
Conclusion
The winner of the battle between Bosch 4100-10 vs GTS1031 goes to the 4100-10 version. This model will win your heart thanks to its great mobility and large ripping capacity.
The runner-up, GTS1031, isn’t that bad. You can experience an industry-leading speed for quick and clean cuts. Get more work done with this machine!
The Related Articles
Comparison Articles
- DeWalt DWE7491RS Vs Bosch 4100-10
- DeWalt DWE7480 Vs Bosch GTS1031
- DeWalt DW745 vs Bosch GTS1031
- DeWalt DWE7491RS vs DWE7480